How Do I Install Ezydeck?

How To Install:

Installation of the Ezydeck™ Modular Decking System is both quick and easy. Only minimal preparation is necessary – no adhesive, no special tools and no extra parts are required. The basic requirement is a solid, level and well drained surface, either indoors or outdoors. Most paved or concrete areas including balconies, patios, verandas, entrances, around pools and other wet areas are ideal for laying Ezydeck™ tiles. Even high traffic commercial areas can be laid with the Ezydeck™ Modular Decking System.

To assemble the Ezydeck™ Modular Decking System, place the first tile in position and then lock the adjacent tile in place by pushing it down to engage the special connecting tabs on the edges of each tile. Continue adding tiles in this manner until all tiles are securely locked in place to each adjacent tile. Different patterns can easily be made by combining tiles from any of the four available styles.

Step 1
Measure the area to be covered and purchase tiles. 12 standard tiles will cover 0.92 sq.m. (10 sq.ft.).
Step 2
Start laying Ezydeck™ tiles from one corner of the area to be covered. Place the first tile in position and then lock the adjacent tile in place by pushing it down to engage the special connecting tabs on the sides of each tile.
Step 3
Continue adding tiles in this manner until the required area is covered and all the tiles are securely locked in place to each adjacent tile. Different patterns can easily be made by combining tiles from any of the four available styles.
Step 4
To fit around pipes, posts or corners, simply cut out the required shape from the tile using a jigsaw or handsaw and lock the tile into place. Any screws in cut out sections should be replaced at appropriate points in the remaining part of the tile to ensure that all slats are securely fastened to the base.
Step 5 (optional)
If preferred to hide the plastic connecting tabs on the outermost row of tiles, screw the special jarrah edge strip (available in lengths of 1200mm etc.) to the edge of the wooden tiles.
Step 6
Bring up a chair, pour a drink, relax and admire your new deck.

Fitting around corners, posts and pipes is no problem since the unique base allows cut-outs to be achieved with ease. Just cut the desired shape from the tile using a jigsaw or handsaw.

Care should be taken if the tiles are being installed in exterior situations when the temperature is below minus 20ºC (minus 4ºF) as the polypropylene connecting tabs on the base can become increasingly brittle at very low temperatures. Provided the tiles have been laid on a stable base however, low temperature conditions should not affect the ongoing performance of the Ezydeck™ Modular Decking System.